Menu

Shop

11853 ITEMS

show blocks helper

The K&N 57-1569 FIPK air intake system replaces the restrictive factory air filter and air intake housing on some Jeep Cherokee models. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. Air is directed through an aerodynamically engineered intake tube into the engine's throttle body for a guaranteed power gain. The 57-1569 air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. The tube accommodates the factory crank case vent hose. Depending on driving conditions, the oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicle's existing factory mounting points. The tools needed are a flat blade screwdriver, ratchet set, a 4mm allen, and several wrenches.
K&N's easy to install air intake systems replace the restrictive factory air filter and air intake housing allowing for virtually unrestricted air flow. This power gaining air intake comes with K&N's famous million mile limited warranty.

SKU:
162860
Weight:
10.0 lbs
Dimensions:
22.251981 × 14.000008 × 12.500007 in

K&N XD air filters use a Deep Pile Design, Extra Fine Weave Grade Cotton and alternate geometries for added efficiency and capacity for off-road conditions. This extra thick filtering medium provides the increased protection demanded by high dust conditions while continuing to provide the performance necessary to stay in the front of the pack. The XD Cotton medium was developed for the extreme conditions encountered by race teams in the Baja 1000. This real world testing is combined with testing performed at K&N's own Dust Retention Laboratory in conformity with the ISO 5011 test protocol. XD Cotton Air filters can be cleaned in the same way as K&N's original cotton air filters.
K&N XD air filters use a Deep Pile Design, Extra Fine Weave Grade Cotton and alternate geometries for added efficiency and capacity for off-road conditions.

SKU:
162906
Weight:
1.5 lbs
Dimensions:
11.251975 × 6.500004 × 6.251972 in

The K&N 57-1568 FIPK air intake system replaces the restrictive factory air filter and air intake tubing while retaining the factory air box. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow for a guaranteed power gain. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The 57-1568 air intake comes with a replacement K&N high-flow air filter and an aerodynamically engineered intake tube that easily connects to your vehicle's factory air box and turbo inlet. The air filter can be used for up to 50,000 miles before servicing is needed depending on driving conditions. This air intake system is designed for easy installation and usually takes 90 minutes or less to install. The only tools needed are a flat blade screwdriver and a ratchet set.
K&N's easy to install air intake systems replace the restrictive factory air filter and air intake housing allowing for virtually unrestricted air flow. This power gaining air intake comes with K&N's famous million mile limited warranty.

SKU:
163007
Weight:
7.5 lbs
Dimensions:
19.751979 × 12.500007 × 12.000006 in

K&N's replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. We make over 1,200 different replacement air filters for the majority of vehicles on the road. These filters are washable and reusable and are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple. With most vehicles you simply remove the disposable air filter and replace it with a K&N. See applicable instruction sheet for details. Our stock replacement air filters for street vehicles are covered by our famous K&N Million-Mile Limited Warranty and will be the last air filter your vehicle will ever need.
K&N's replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. Our stock replacement air filters for street vehicles are covered by K&N's Million-Mile Limited Warranty.

SKU:
163011
Weight:
2.0 lbs
Dimensions:
7.500004 × 7.500004 × 7.251972 in

The K&N AirCharger 63-3105 air intake system for select Chevrolet Camaro models replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to smooth and straighten air flow, dramatically reducing air intake restriction. The 63-3105 allows your Camaro's engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. An included heat shield installs into the same area as the factory air box, keeping hot air from the engine away from the air filter. The custom molded air intake tube directs this cooler, denser air to the engine's throttle body for a guaranteed horsepower gain. Depending on driving conditions, the included oversized, chrome-topped K&N high-flow air filter can be used for up to 100,000 miles before servicing is needed. The easy installation process of this air intake system normally takes less than 90 minutes, and requires only a socket set, a flat blade screwdriver, a Torx screwdriver and a few wrenches. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.
K&N's easy to install air intake systems replace the restrictive factory air filter and air intake housing allowing for virtually unrestricted air flow. K&N air intakes come with K&N's famous million mile limited warranty.

SKU:
163010
Weight:
9.75 lbs
Dimensions:
22.000012 × 14.000008 × 12.500007 in

The K&N 77-1516KP high-flow performance air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Dodge Durango and Dakota models. The restrictive factory air filter and air intake housing on your vehicle are replaced by this K&N air intake system which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. The improved air flow allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more usable power and acceleration throughout your engine's RPM range. The 77-1516KP air intake comes with a black rubber topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory air temperature sensor and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points requiring commonly available tools to do the job. Some K&N 77 series air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.
K&N's easy-to-install performance air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tube comes in an attractive chrome-like finish.

SKU:
16318
Weight:
11.25 lbs
Dimensions:
21.25198 × 14.000008 × 12.751975 in

The K&N 57-9014-1 FIPK air intake system replaces the restrictive factory air filter and air intake housing in some Toyota Tundra models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The 57-9014-1 air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through an aerodynamically engineered intake tube into the engine's throttle body for a guaranteed power gain. The tube accommodates the factory mass air sensor and 3 replacement silicone vent hoses. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a couple of screwdrivers, a ratchet set and several wrenches. K&N 57 Series FIPK's are street legal in all 50 US states and come with K&N's Million Mile Limited Warranty.
K&N's easy to install air intake systems replace the restrictive factory air filter and air intake housing allowing for virtually unrestricted air flow. This power gaining air intake comes with K&N's famous million mile limited warranty.

SKU:
16320
Weight:
12.0 lbs
Dimensions:
22.500012 × 14.251976 × 12.251975 in

K&N's Universal Air Filters are designed and manufactured for a wide variety of applications including racing vehicles, radio-controlled cars, generators, snowmobiles, tractors, and other applications. Regardless of the angle or offset diameter of the air intake, there is probably a K&N Universal air filter for your equipment. All filters are constructed with ultra-strong molded pliable rubber flanges which absorb vibration and allow for secure attachment and can also be stretched for up to 1/16 of an inch (1.5mm) to fit in-between sizes. K&N universal air filters are washable and reusable.
Regardless of the angle or offset diameter of an air intake, there is probably a K&N Universal air filter for your equipment. K&N universal air filters are washable and reusable.

SKU:
16319
Weight:
1.25 lbs
Dimensions:
11.000006 × 6.500004 × 6.251972 in

The K&N 57-3055 FIPK air intake system replaces the restrictive factory air filter and air intake housing in some Chevrolet SSR models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The 57-3055 air intake comes with a K&N ultra-lightweight carbon fiber top and flanged high-flow air filter that directs air into the custom molded intake for a guaranteed power gain. The tube accommodates the factory mass air sensor and crank case vent hose. The oversized oval shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less, and requires a flat blade screwdriver to do the job. K&N 57 Series FIPK's are street legal in all 50 US states and come with K&N's Million Mile Limited Warranty.
K&N's easy to install air intake systems replace the restrictive factory air filter and air intake housing allowing for virtually unrestricted air flow. This power gaining air intake comes with K&N's famous million mile limited warranty.

SKU:
16336
Weight:
11.75 lbs
Dimensions:
35.251988 × 13.251976 × 10.500006 in

The K&N AirCharger 63-9029 air intake system replaces the restrictive factory air filter and air intake housing in some Toyota 4Runner models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your 4Runner's engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The 63-9029 air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. The placement allows air to be directed through a custom molded intake tube into the engine's throttle body for a guaranteed power gain. The oversized air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install requiring only a couple of screwdrivers, a socket set and several wrenches. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.
K&N's easy to install air intake systems replace the restrictive factory air filter and air intake housing allowing for virtually unrestricted air flow. K&N air intakes come with K&N's famous million mile limited warranty.

SKU:
16394
Weight:
12.5 lbs
Dimensions:
18.251978 × 18.251978 × 12.500007 in

K&N's Universal Air Filters are designed and manufactured for a wide variety of applications including racing vehicles, radio-controlled cars, generators, snowmobiles, tractors, and other applications. Regardless of the angle or offset diameter of the air intake, there is probably a K&N Universal air filter for your equipment. All filters are constructed with ultra-strong molded pliable rubber flanges which absorb vibration and allow for secure attachment and can also be stretched for up to 1/16 of an inch (1.5mm) to fit in-between sizes. K&N universal air filters are washable and reusable.
Regardless of the angle or offset diameter of an air intake, there is probably a K&N Universal air filter for your equipment. K&N universal air filters are washable and reusable.

SKU:
16430
Weight:
0.25 lbs
Dimensions:
6.000003 × 4.000002 × 2.000001 in

The K&N 69-8005TWR Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Subaru Impreza WRX STI and WRX STI models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-8005TWR air intake comes with an ultra-lightweight carbon fiber topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive red powder-coat finish that's made to last and it accommodates the factory mass air sensor. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a couple of screwdrivers, ratchet set and some wrenches. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.
K&N's easy-to-install Typhoon air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tube comes in a red powder coat finish.

SKU:
16435
Weight:
8.25 lbs
Dimensions:
18.251978 × 14.251976 × 8.500005 in